Live Opportunities
1,492
Data Freshness
Daily Sync
Top Segment
Goods
Budget Range
-
Live Opportunities
MALE ELBOW CONNECTOR
LEVER HANGER
Pipe Wrench Size 350 mm
SET OF GEAR CASE FELT SEALS
Ceiling Mounted Swivelling type Fan
Set of Rods and nuts for pinion extraction and provision of 3 Phase motors of type 6FRA 6068 as per S.C.Rly.Drg.No. /ELS/LGD/TM/3/63. Set consists of the following items. 1) Guide Rod for pinion Provision-02 Nos. /Set. 2) Rod for Pinion extraction -02 Nos./Set. 3)Lifting rod for rotors-02 Nos./Set 4)Hex nut special-04 Nos./Set. 5)Lifting blocks-02 Nos./Set. 6)D-shackle(ISO 2415-8-Dx5)-2 Nos./Set.
Set of spares for ELGI Make CRC 150 Compressor consisting of (1) |RING PKG 17.5X22X2 LG01080 to part no: 000521950 Qty- 100 nos, (2) PLUG DRAIN 3/8"BSP CRC150 to part no: 000481220 qty- 100 nos , (3) DS CUM BREA.NYL.LG01;BРО to part no: 000427030 Qty- 100 nos.
LAMINATIOR MACHINE, ROLL TO ROLL HOT TYPE, for A3 (297 X 420) mm (Width), Lamination Film (Thickness) 290 (microns). Operating Temperature: 90 deg Cel along with standard accessories. Make : GOBBLER, LAMINATOR, TEXET, VMS, AGARO Or Similar.
PCB 110V (For Electric Loco) to Prag Polymer Part No.4204190.
Capacitor 25mfd +/-5% 600/660V RMS of GE make to Part no. 27L6022 as per Drg.No.B/TRS/CAP/3/15 or its latest .Makes: GE/Genteq/Capcom/Regal beliott or it's equivalent.
Nylon spindle for EP valve as per ELS/BZA Drg. No. B/TRS/HTC/4/46, Alt - 2 or latest if any.
Tread wear gauge (Wheel profile gauge) as per RDSO Drg. No. SKDL-3592 Alt-06 for thick f lange profile and wear adopted profile combined for B.G. Locos, made of stainless steel with hardware measuring pointers Make: PIE/JOYTHI ENTER PRISES (OR) Equivalent. Note: Calibration Certificate should be produced at the time of supply along with material.
Manganese liner 7mm thick for WAG7 locos as per S.C.Railway Drawing No.B/TRS/G7/BOGE/4/203.(As per UVAM ID: 2101015).
1400 watt corded small angle grinder, Power: 220-240V AC, 50/60 Hz, Disc dia of 125mm
Test Bench for Master Controller for 3-Phase AC locos with facilities as given below. (1)Facility for checking of CAM switch conditions with respect to angle transmitters out put current with the help of LED indication. (2) Provision of one digital mA meter to measure angle transmitter current. (3) Provision of checking reverser switch status in Forward Neutral & Reverse conditions. (4) Provision of variable DC power supply with digital voltmeter for master controller supply voltage ( Standard supply voltage is 24 V DC) (5)Input Supply :230 V AC/1A.
Suspension spring for WAP4 locos (Primary) as per RDSO Drawing No. SKDL 3472, Alt-6 or latest and conforming to RDSO Specification No. MP.0.4900.12 (Rev-05)of Dec"20 or latest. (Note 1: Any spring with flat end of the coil found touching with the first coil will be rejected. 2: To supply spring in higher range of compressed height i.e.,in group B only as per Drawing No. SKDL 3472, Alt-6 or latest. (As per UVAM ID: 2101044).
IOH Kit for Air Dryer Make SIL as per Annexure (17 Items 48 Nos) or equivalent as per CLW/MS/03/041 Alt-1.
Hose flexible for TM135 Ventilation of 3-phase locos as per CLW Drg. No. 1209-11.339-037 Alt - 1 or latest if any.(As per UVAM ID :2100225)
Hyderabad Division:1) Kacheguda & Bolarum - Replacement of existing Integrated Passenger Information System(IPIS) at KCG and provision of CIBs at BMO station as per RDSO/SPN/TC/108/2019 Ver 2.0 Amendment No.1 or latest 2) Basar-Provision of Platform No 4,Shelter (COP) , retaining wall, and extension of exg FOB to PF 4 as part of development of New Holding area on account of Godavari Pushkaram2027 - Telecom arrangements, . 3)SC-MUE Section: Provision of COP at NZB for a length of 25m on PF1, 160m on PF 2/3, KMC for 300m on PF 1, 200m on PF 2/3, BSX for 210m on PF 1, 160 PF 2 - Telecom arrangements. 4)SC-DHNE Section:-Provision of COP at KRNT for 255m on PF No.1 & 160m for PF No. 2/3.B) MBNR of 275m on PF1, 250m on PF2/32 - Telecom arrangements. 5) GWD - Upgrading of amenities by improving the existing infrastructure as a part of ABSS works -Telecom arrangements 6)Provision of Fault management and remote diagnostic Infrastructure for quick repair and maintenance over Hyderabad Division.
FLEX BALL CABLE SHORT
Major Public Organizations
Browse Other States
Strategic Bidding Insights for
South Central Railway Tenders
South Central Railway currently has 1,492 active tender opportunities. Tenders are available across 9 states including Andhra Pradesh, Telangana, Maharashtra, Bihar, Rajasthan. Browse the latest procurement notices, bid invitations, and contract opportunities from South Central Railway to find opportunities matching your business.
Navigating procurement in this sector requires thorough documentation and adherence to stringent eligibility criteria. Most successful bidders in this category maintain updated vendor profiles and demonstrate strong logistical capabilities.
Actionable Tips
- 1Review the specific empanelment criteria for South Central Railway.
- 2Track corrigendum updates diligently to avoid bid rejection.
- 3Maintain high-resolution digital copies of technical qualifications.